What are the requirements for wiring of lighting Pole Top Box?

We should pay more attention when installing the lighting Pole Top Box, which is mainly composed of box shell, panel, mounting bracket, neutral bus bar, grounding bus bar and other components. Especially when wiring it, you should be more careful. Next, we will introduce the requirements for wiring of lighting Pole Top Box.

1、 If the lighting Pole Top Box is installed, it is necessary to purchase a household incoming line, which is connected to the household main switch through the live wire in the leakage switch, and then connected to the switches in each room through the live wire. Since the neutral line is shared, it is enough to separate it to each room.

2、 When wiring the lighting Pole Top Box, the design of the wiring diagram of the Pole Top Box shall be clearly seen, and the zero line and fire line shall not be confused. If the two are connected incorrectly, there will be no power supply, resulting in misunderstanding. In fact, whether the connection is right or wrong, because there is a function with a leakage switch, the zero line and live line will act, because many zero lines are connected inside the leakage switch. Therefore, after the switch is opened, only the live line is disconnected, and there is no zero line. Therefore, it is necessary to pay attention to the wrong connection of live line and zero line. As for how to distinguish the two, don't make a mistake. Look at the leakage switch.

3、 Before installing the lighting Pole Top Box, first purchase all the equipment involved, then measure the rated current and working voltage of the circuit, configure a similar Pole Top Box according to the power supply of the circuit, and then design a wiring diagram of the household lighting Pole Top Box, and carry out construction and installation through this wiring diagram, so that the whole process is completed and the installation is very convenient.

These are the requirements for the wiring of the lighting Pole Top Box. We must pay more attention to the installation and operation of the lighting Pole Top Box and install it according to the relevant requirements to avoid problems and dangers.