The Ready Board reduces the risk rate

Safety accidents caused by overload power of Ready Board use often occur. If you don't understand the professional knowledge of safe power use, it is very easy to lead to electric shock accidents, unfortunate death, electrical fire, electrical damage and other accidents

"Safe use of electricity, ignorance", in order to ensure safe use of electricity at home, the interior decoration must be equipped with "safety housekeeper" - the leakage protection button in the distribution cabinet.

"Safety housekeeper" in power distribution cabinet

The leakage protection button can be called a weapon for fire safety and electricity resistance! Its function is to first check the power running condition when the power running condition is generated, and then let the distribution cabinet automatically turn off the power supply (alias power tripping). This button is called "personal safety key", also known as commercial insurance key. If you observe carefully, you will find that the leakage protection is often marked with a large line of words "press once a month", which is actually urging everyone to maintain regularly to ensure that the leakage protector is in normal operation.

When we press the button, the power will be switched off immediately, indicating that the leakage protection function is normal. In the future, just press and hold the power switch. If there is no power jump after pressing and holding, it means that the leakage protection power switch is ineffective and must be removed and replaced.

01 do not overload power

If you have already moved in, you can roughly calculate the total volume of electricity at home and compare it with the larger rated voltage of the watt hour meter and power plug. If it is insufficient, you should immediately report to the power supply system unit for installation and expand the capacity of the watt hour meter.

Central air conditioning, microwave oven heating and other high-power electrical appliances should not be started separately, otherwise the impulse current will be too large in a moment and the watt hour meter will be burned.

If the interior decoration is being prepared in advance, the interior designer should fully consider the future power consumption when designing the power supply circuit, and the order of the power supply circuit must be improved according to the; Choose * * Brand for wire raw materials, pay attention to standardized engineering construction for pavement, and minimize overload power consumption.

02 be careful when inserting wires

The household plug-in line should be installed by technical professional staff, otherwise it will lead to serious adverse effects. It is forbidden to use copper wire, aluminum wire, etc. to replace the safety tube. The data signal coaxial cable cannot be used to replace the power plug. White tape and transparent tape of medical equipment cannot be used to replace black tape of insulating layer.

03 electrical appliances cannot be used due to "problems"

When the electric appliance finds abnormal conditions, it should be stopped immediately, such as odor, smoke, vibration, noise expansion, temperature rise, the switching power supply should be disconnected immediately, and the technical professional staff should be invited to repair. It is not necessary to disassemble the electric appliance independently to prevent the internal components of the electric appliance from being damaged.

04 properly place the arrester

Electrical appliances should be prevented from over time application and should have a moderate rest; Electrical appliances should be placed in dry, clean, natural ventilation, no sunlight or dark areas.

It is best to turn on the heater once a week to avoid moisture and rust.

05 power plug and power socket shall be paired

The power cord plug of electrical appliances shall be consistent with the power plug, and there is no need to insert it forcibly to prevent short circuit fault caused by damaging the power socket.

06 common problems of touching electrical machinery and equipment

In summer, people always sweat. When touching electric machines and equipment, we should ensure safety. Remember not to touch the lamp port and power socket of induction electrification with wet hands and wet rags.

07 it is not necessary to observe the inside of the power plug

Never touch or test the inside of the power plug with force or conductive objects (such as thin iron wire, steel nail, paper clip and other metals). Especially when connected to the power supply, it should be completely avoided.

08 do not pull the wire hard

After the application of electrical appliances, the power cord plug should be pulled out, otherwise the electrical machinery and equipment are always connected to the power supply and waiting for power, which is also unsafe.

When pulling out the power plug, do not pull the wire with force to avoid electric shock caused by damage to the cable sheath of the wire. If you find that the insulation layer of the wire is damaged, you should immediately carry out disassembly and replacement to avoid electric injury.