Key points of production technology of power distribution box

The installation process of power distribution box must comply with the specifications. In addition to the installation requirements of the installation specifications, its perpendicularity, levelness and elevation meet the requirements, and its production process shall be treated as follows:

First, inside the power distribution box, the holes are arranged orderly, fixed with lock nut, and the pipe orifice is well treated with protective orifice;

Second, the ground wire and zero wire in the power distribution box shall be connected through the busbar, and there shall be no more than two wires on each bolt, and the line color separation shall meet the specification requirements;

Third, the cable should be listed to indicate where it comes from and where it goes;

Fourth, the cable arrangement is neat, firmly fixed, the process is beautiful, and the box is clean and free of sundries;

Fifth, the box door with electrical components shall be grounded, the board surface shall be clearly marked, clean and bright, the board surface shall be flat and the paint shall be complete;

Sixth, the cable inlet of distribution cabinet shall be sealed for fire prevention

Therefore, the above points are its important roles. Deal with them accordingly to make its use more convenient.