Introduction of stainless steel meter box

Stainless steel meter box is an outdoor comprehensive power distribution device integrating metering, outgoing line, reactive power compensation and other functions. It has the functions of short circuit, overload, over-voltage, leakage protection and so on. It is small in size, beautiful in appearance, economical and practical. It is installed on the pole of outdoor column transformer. It is a new generation of ideal power distribution product for urban and rural power grid transformation.

The box structure is discrete and horizontal. The shell is made of 2mm high-quality stainless steel plate by multiple flanging process (or honeycomb structure stainless steel double sandwich composite plate, with flame retardant, environmental protection, heat insulation, anti condensation and other properties). Special stainless steel welding process is adopted. After the box is formed, the overall strength is high, the surface is bright and clean as a mirror, and no weld marks are left. The internal installation beam (plate) is hot-dip Galvanizer The technical treatment shall ensure no rusting within 20 years; the front and back door of the box body shall be opened for the convenience of user operation and maintenance, and high elastic anti-aging sealant strip shall be inlaid around the door. Each door shall be equipped with two kinds of door locks, light and dark. The open lock shall be equipped with rain proof and anti rust rain cover: the measurement room shall be fully enclosed with lead sealing device; the side of the box body shall be equipped with rain proof and anti foreign matter incoming cable conduit, and the bottom shall be punched with ventilation hole and cable outlet hole The top is equipped with ventilation channel and wire mesh, with the functions of waterproof, antirust, dustproof and foreign matter prevention, with the protection grade of IP54.