According to the process of industrialization, wire connection and signal transmission have been realized for a long time, but how to ensure the transmission process is the purpose of the terminal des ...
The development of terminal industry is different in different regions. Europe, North America and parts of East Asia developed earlier. They mainly got the transition in the second industrial revoluti ...
How to install and use the current transformer terminal block? The principle of current transformer is based on the principle of electromagnetic induction. The current transformer consists of a close ...
The connection terminal is a conductive part used for the electrical connection between indoor and outdoor transformers, high-voltage apparatus and bushing, etc., or between the high-voltage power equ ...
The control mode and selection of high voltage circuit breaker in the substation of circuit breaker terminal are related to the control mode of substation and the scope of substation. The control styl ...
At present, the installation position of outdoor cable terminal block is relatively concealed, The possibility of suffering direct lightning stroke is small, but after all, some cables are connected w ...
Many terminal blocks of AC contactor and other electrical equipment use arch gasket. This wiring method is a small problem for a terminal to connect a wire end, but when a wire end or a wire head of d ...
The flameproof terminal block is suitable for the explosion-proof parts between the wiring chamber and the main chamber of the flameproof electrical equipment. It is used for the electrical connection ...
Design of terminal block, including terminal block, terminal block and terminal block. There are three kinds of contact modes: surface, line and point. Point contact is the most reliable. In order to ...
The reliability of terminal blocks is an important problem for the whole machine or system. This is because the terminal is used as a component in the whole machine or system, and its reliability dire ...
