How to wire the interior of the lighting electrical ready board?

When wiring inside the lighting electrical ready board, certain steps and precautions need to be followed to ensure the safe and reliable operation of the electrical ready board. The following are the steps for wiring inside the lighting electrical ready board:

1. Prepare tools and materials: Ensure that the required wires, circuit breakers, busbars, plastic ties, pliers, and other tools and materials are ready, and check their quality and specifications to ensure they meet the requirements.

2. Install the track: Determine the position of the track based on the number of circuit breakers, and use a pencil to draw lines to prepare for drilling and installing the track. Ensure that the track installation is level and consistent with the circuit breaker operating hole on the cover plate.

3. Install circuit breaker: Pay attention to the position of the circuit breaker installation hole on the box cover, ensure that the circuit breaker is installed in the reserved position, and arrange it from left to right. The reserved position is usually placed on the right side of the electrical ready board, so that there is a complete space between the first row main circuit breaker and the sub circuit breaker for wiring.

4. Wiring:

The wiring between the main circuit breaker and each sub circuit breaker inside the box generally goes on the left side, while the outgoing lines of the electrical ready board generally go on the right side.

The wires should be straight and free from any grooves, and tied with plastic ties of appropriate size and even spacing, usually 100mm.

The wire bending should be consistent and there should be no dead bends to prevent damage to the wire insulation and internal copper core.

5. Identification and inspection: Mark each wire properly for subsequent maintenance and repair. Finally, carefully inspect the entire electrical ready board to ensure that all connections are secure, reliable, and free from exposure or damage.

By following the above steps, the wiring work inside the lighting electrical ready board can be completed. In practical operation, relevant safety regulations and standards should be strictly followed to ensure the safe and reliable operation of the electrical ready board.