How to solve the problem of unstable installation of lighting electrical ready board?

The problem of unstable installation of lighting electrical ready boards needs to be resolved in a timely manner to ensure the normal operation and safe use of the electrical ready boards. Here are some specific solutions:

Check installation location: Firstly, ensure that the electrical ready board is installed on a solid and flat wall surface, avoiding installation on soft walls or areas prone to vibration.

Choose an appropriate fixing method: For exposed electrical ready boards, open bolt (expansion bolt) should be used for fixing, and the bolt length should meet the requirements of burial depth, box bottom plate thickness, nut and washer thickness, and appropriately add "head allowance". For smaller electrical ready boards, wooden bricks can be pre embedded at the installation site, and then fixed to the wooden bricks with wooden screws.

Strengthening fixing measures: If the volume or weight of the electrical ready board is large, the number of fixing points can be increased, and multiple bolts or brackets can be used for fixing to improve stability.

Check and adjust installation quality: After installation is completed, the verticality, levelness, and gap with the wall of the electrical ready board should be checked to ensure compliance with regulatory requirements. If there is any deviation, it should be adjusted in a timely manner.

Through the above measures, the problem of unstable installation of lighting electrical ready boards can be effectively solved, and the stability and safety of electrical ready boards can be improved.