How To Protect The Corrosion Of Terminal Blocks?

In the process of use, in order to avoid damage to the terminal due to environmental factors, it is very important to do a good job in corrosion protection of the terminal, so how do we do a good job in corrosion protection? 1. Wrap an insulating sleeve on the conductive terminal and lead wire to completely wrap the conductive body, which has a high insulation level. The size and thickness of the insulating sleeve can be determined according to the size of the conductive body, and the colors are red, green and yellow. These two measures, especially the second one, have been widely used in power distribution equipment. 2. Coating a layer of high voltage resistant insulation coating on the surface of conductive terminal and lead wire can play a certain role in insulation and prevent short circuit accidents caused by small animals. The cable shall be protected against corrosion by fire prevention measures. The cable in the shaft shall be coated with organic coating (white), and the coating thickness shall be greater than 1.0 mm. The cable trench and the hole through the bend should also be blocked, including fire prevention wall at a certain distance, so as to ensure that the cable will not spread in case of fire, and the fire can be controlled within a certain range. Therefore, it is very important to do a good job in anti-corrosion treatment of the terminal, so as to ensure its good performance and provide reliable protection for people.