How to avoid the problem of excessive temperature in the split meter ready board?

Excessive temperature in the split meter ready board may be caused by overload, cable overheating or other faults. The following measures should be taken to avoid problems:

Load shedding: Ensure that the equipment in the split meter ready board does not exceed the rated load, distribute the load reasonably, and prevent the temperature from rising due to overload.

Regular inspection: Establish a regular inspection mechanism to check split meter ready boards, cables, sockets, switches and other equipment, and repair problems in a timely manner to ensure normal operation of the equipment.

Optimize ventilation: Make sure there is good ventilation around the split meter ready board. Consider adding ventilation facilities, such as fans or vents, to help dissipate heat.

Use efficient cooling equipment: Choose electrical equipment with good heat dissipation properties to reduce internal temperature rise.

Prevent cables from overheating: Check cables regularly to ensure they are securely connected to avoid overheating and causing temperature rise.

Install a temperature monitoring device: Install a temperature monitoring device. Once abnormal temperature is detected, it will alarm in time and take corresponding measures.

Regular maintenance: Carry out regular maintenance, clean up debris around the split meter ready board, and ensure the normal operation and ventilation of electrical equipment.

Through the above measures, the temperature of the split meter ready board can be effectively reduced and the normal operation and safety of the electrical equipment can be ensured.